IP STRUCTURES

Arcos:
The steel arches are manufactured from a system of galvanized steel pipes with an outside diameter of 8,9 cm and a wall thickness of 3,04 mm.

Mechanical properties of steel arches:

• Elasticity limit (min.): 3.515,35 kg / cm²
• Resistance to tension: 3.866,88 kg / cm²
• Elongation percentage in 5,08 cm: 25%
• Modulus of elasticity: 29,5 x 7,45 kg / cm²

Clamps:
They consist of spheres of 25,4 cm in diameter, are molded in sand using an 535 aluminum alloy and have the following mechanical properties:

• Maximum resistance to tension: 2.460,74 kg / cm²
• Elasticity limit: 1.265,53 kg / cm²
• Elongation percentage in 5,08 cm: 8%

Closures:
The primary closures incorporate sleeves and pins and their design will be guaranteed against counterfeiting. They are made of stainless steel (SST) by virtue of the ASTM F 879 standard

Reinforced steel cables:
The outer cords of the rope have a coating of polyester threads (standard of carpet spinning), which guarantees maximum abrasion resistance and color durability. Our steel cables, manufactured according to the EN10264, are galvanized and have a robustness of 1770 N / mm², with a breaking strength of 3.585 kgf. We use six-core galvanized steel cables, which have the same design as the fiber strings. The result is a coarse surface texture that allows optimal grip. The outer diameter of the cable with lining is 20 mm. The stainless steel connections support a minimum of 1.587 kgf. They are resistant to abrasion, stable color, and extremely durable and resistant to vandalism.

String replacement:
Our cords are fragmented, in short sections, to facilitate their replacement in case of wear or breakage. We have designed and patented some ultra-resistant cable joints, hidden inside the clamps, that transmit / resist all the efforts and allow their disconnection from the assembly and subsequent replacement, avoiding having to disassemble all the wiring and being forced to close the park.

Polyethylene pieces:
These parts are rotationally molded using a linear low density polyethylene, compound and primed with a tensile strength of 1,22 kg / cm², in accordance with ASTM D638. Color additives are added and for stabilization against ultraviolet rays. The thickness of the wall will vary depending on the product, but it will be between 4,7 mm and 7,9 mm. There are five standard colors available.

Polyester powder paint:
All metal components with polyester paint coatings are carefully washed in a pre-treated process of 5 phases. They are carefully dried and processed through a set of automatic sprayers that apply electrostatic powder paint. The pieces are then placed in the oven at 204,44 degrees. The average thickness of the powder paint is 0,10 mm.

The long-lasting TGIC polyester powder is specially formulated for optimum stability against ultraviolet rays and gloss retention. Meets or exceeds ASTM standards in relation to:

• The duration (D-3363)
• The impact (D-2794)
• The resistance of the spray to salt (B-117 and D-654)
• Exposure to ultraviolet rays (G-54)
• Adhesion (D-3359, method B)

An adhesion test is carried out daily verifying the paint line.

Pieces of Permalene:
These pieces are manufactured with high density polyethylene 19 millimeters that has been specially formulated for optimal stability against ultraviolet rays and good color retention. The products have a minimum density of 960 kg / m³ in accordance with ASTM D1505. There are five standard colors available. Some pieces of Permalene are available in two colors, with two outer layers of 17,77 mm thick on an inner core of 15,49 mm of another contrasting color. There are eight standard options available in two colors.

FREE CHOICE OF COLORS FOR EACH COMPONENT:

EXAMPLES OF COLOR PALETTES:

100 YEARS | METAL COMPONENTS

For Weevos ™ steel posts and arches against structural failure due to material or manufacturing defects. This guarantee does not include any aesthetic aspect, nor the natural wear and tear due to the normal use of the products.

15 YEARS | PLASTIC COMPONENTS

For all plastic (including TuffTimbers ™) and steel components (except of steel poles for 100 years), platforms and linings Tenderstuff (except for Wiggle ladders, chain ladders and swing chains) against structural failure due to material or manufacturing defects.

10 YEARS | GFRC PRODUCTS

For products of concrete reinforced with fiberglass (GFRC, Glass Fiber Reinforced Concrete) against structural failure due to natural deterioration or manufacturing defects. It does not cover minor splinters, very fine cracks or efflorescence.

8 YEARS | AERONET, NETPLEX AND CABLES

For Aeronet ™ climbing nets and climbing cables against material or manufacturing defects. In CoolToppers ™ fabrics against faults of significant discoloration, deterioration, collapse, mold. This warranty is limited to the design charges established in the specifications found in the technical information.

3 YEARS | OTHER PARTS

For all other pieces, for example: swing seats, grids, chain ladders, and swing chains, zip-line carts, all spring equipment, including Sway Fun®, PVC belts, rockers, bridges, etc. ., against failures due to corrosion or natural deterioration or manufacturing defects.

This warranty does not includes damages caused by vandalism or any aesthetic aspect or natural wear and tear due to the normal use of the products.

ASTM (American Society for Testing and Materials)

It is a technical-scientific organization being the main promoter of standards to test different types of materials.

TÜV

The European Regulation was developed by the European Committee for Standardization. Landscape Structures products have been designed to comply with the European EN1176 playground safety regulations being certified by the TÜV institute.

ISO 9001: 2000

Since 2000 year, Landscape Structures is certified in the ISO 9001 with a process-oriented structure, customer oriented emphasizing quality continuous improvement

ISO 14001: 2004

Since 2004 Landscape Structures is certified by the ISO 14001 which leads us to operate in a way that fosters ecological awareness.