PlaySense® structures employ poles of smaller section that can incorporate certain PlayBooster® components.
A large part of the PlayBooster® structures can be raised with the PlaySense® system, which will save material and complexity and therefore be more economical.
POSTS:
The posts of the Play Sense system are extruded aluminum 6005-T5 in accordance with ASTM B-221, (in the form of +) of 11,5 x 11,5 cm. Of a minimum thickness of 7 mm. Aluminum recycled to 100% is used.
PLATFORMS:
All platforms have a modular design and holes of 7,9 millimeters on the surface. There will be a minimum of four (4) slots on each face to allow assembly of the components. The platforms are manufactured from a single sheet of low carbon steel of 2,6 mm in accordance with ASTM A-469. The sheet is perforated, shaped and reinforced to guarantee its structural integrity. Then the unit is covered with brown TenderTuff. All the metallic components that are covered with TenderTuff are carefully cleaned, the primer is made in a water-based thermosetting solution. The primed parts are preheated before immersing them in liquid polyvinyl chloride (PVC) and stabilized against ultraviolet rays. They are subjected to 204,44 degrees centigrade and the final coating should have an approximate thickness of 2 millimeters and a hardness of 85 in durometer, with matte finish.
CLOSURES:
The metal handrails are made with galvanized steel frames of 5 x 7 mm with welded radius cylindrical bars. The activity panels will be manufactured with Permalene; high density polyethylene of 19 millimeters that has been specially formulated for optimal stability against ultraviolet rays and good color retention. The products have a minimum density of 960 kg / m³ in accordance with ASTM D1505.
ROTOMOLDEATED POLYETHYLENE PIECES:
Roofs, tunnels, slides and other parts are rotationally molded using linear low density polyethylene, composite and primed with a tensile strength of 1,22 kg / cm², in accordance with ASTM D638. Color additives are added and for stabilization against ultraviolet rays. The thickness of the wall will vary depending on the product, but it will be between 4,7 mm and
7,9 millimetres.
FREE CHOICE OF COLORS FOR EACH COMPONENT:
EXAMPLES OF COLOR PALETTES:
100 YEARS | METAL COMPONENTS
For all PlaySense® aluminum posts, stainless fasteners, clamps, beams and stops against structural failure due to corrosion, natural deterioration or manufacturing defects. This guarantee does not include any aesthetic aspect, nor the natural wear and tear due to the normal use of the products.
15 YEARS | PLASTIC COMPONENTS
For all plastic (including TuffTimbers ™) and steel components (except of steel poles for 100 years), platforms and linings Tenderstuff (except for Wiggle ladders, chain ladders and swing chains) against structural failure due to material or manufacturing defects.
10 YEARS | GFRC PRODUCTS
For products of concrete reinforced with fiberglass (GFRC, Glass Fiber Reinforced Concrete) against structural failure due to natural deterioration or manufacturing defects. It does not cover minor splinters, very fine cracks or efflorescence.
8 YEARS | AERONET, NETPLEX AND CABLES
For Aeronet ™ climbing nets and climbing cables against material or manufacturing defects. In CoolToppers ™ fabrics against faults of significant discoloration, deterioration, collapse, mold. This warranty is limited to the design charges established in the specifications found in the technical information.
3 YEARS | OTHER PARTS
For all other pieces, for example: swing seats, grids, chain ladders, and swing chains, zip-line carts, all spring equipment, including Sway Fun®, PVC belts, rockers, bridges, etc. ., against failures due to corrosion or natural deterioration or manufacturing defects.
This warranty does not includes damages caused by vandalism or any aesthetic aspect or natural wear and tear due to the normal use of the products.
ASTM (American Society for Testing and Materials)
It is a technical-scientific organization being the main promoter of standards to test different types of materials.
TÜV
The European Regulation was developed by the European Committee for Standardization. Landscape Structures products have been designed to comply with the European EN1176 playground safety regulations being certified by the TÜV institute.
ISO 9001: 2000
Since 2000 year, Landscape Structures is certified in the ISO 9001 with a process-oriented structure, customer oriented emphasizing quality continuous improvement
ISO 14001: 2004
Since 2004 Landscape Structures is certified by the ISO 14001 which leads us to operate in a way that fosters ecological awareness.
